Home > Dvd Drive > Installation Of New Cd/dvd Rw

Installation Of New Cd/dvd Rw


For more information about testing for CD/DVD drive hardware failures, refer to one of the following HP support documents: Desktop PCs: Testing for Hardware Failures (Windows 10, 8) (in English) Notebook To reset the BIOS, use one of the following sets of steps, depending on the type of computer you are using: To reset the BIOS on a notebook computer, press F9 Installing software that can burn discs, some music software, and some DVD authoring/decryption software can cause these types of problems. Depending on your notebook model and specific CD/DVD drive, the entry name indicates the exact type of disc drive you have (for example, it may read Internal CD/DVD-ROM Drive).

Look for a CD/DVD drive entry in the Device Configuration sub-screen. Label the different connector cables with masking tape so you know where they all go. Article Should You Get a CD, DVD or Blu-ray Drive With Your PC? These expand the capabilities of optical drives by letting you actually write to CD-ROM media.

How To Install Dvd Drive On Pc

Transkription Det gick inte att läsa in den interaktiva transkriberingen. One end of the SATA cable plugs into this and the other end plugs into the device. Figure : Example of CD/DVD drive listing in notebook BIOS Press Esc, then press Enter to Exit BIOS.

This page requires Javascript. If you are using the Windows operating system go to My Computer and you should see your new drive there. Privacy Policy © Copyright 2017 HP Development Company, L.P. How To Connect Dvd Drive To Motherboard Sata You may have to restart the computer.

These are all options to carefully consider. How To Connect Dvd Drive To Motherboard Plug the middle connector into the slave disk drive. Flag as duplicate Thanks! Not all drives are compatible with all computer models.

Logga in och gör din röst hörd. Cd Drive Installation Software lowendguru 386 099 visningar 9:45 How to Replace DVD/CD Drive in Computer Tower - Längd: 4:50. Försök igen senare. Laddades upp den 20 maj 2007 Learn how to repair your computer from the computer repair masters at www.aplusonsitenc.comReplace your CD-ROM watch this video.Our main sites are here...

How To Connect Dvd Drive To Motherboard

If Windows does not recognize the drive, repeat Step 2 to see if the drive name appears in Device Manager and troubleshoot disc burning software if needed. Do not fore the connection. How To Install Dvd Drive On Pc This will help ensure that your drive lasts a long time, and that you get a solid warranty. Install Dvd Drive Windows 7 Step 4: Resetting the computer power Under certain conditions the drive might lose communication with Windows even after restarting Windows, which can cause problems with CD or DVD detection.

Ultimate Handyman 109 939 visningar 3:28 How To Install A Computer CD, DVD or Bluray ROM Drive - Ep. 7 - Längd: 4:38. Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears. In February 2008, Toshiba (the creator and promoter of HD DVD) acknowledged that it was not winning the HD media battle. Plug the drive connector of the IDE cable into the drive. 14. How To Install Cd Drive In Laptop

See your browser's documentation for specific instructions. {} Z7_3054ICK0KGTE30AQO5O3KA30U5 hp-support-head-portlet Actions ${title} Loading... In the image you can see a typical SATA connector on a motherboard. More From Us List Intro and Power Down List Intro and Powering Down List Installing a Second IDE Hard Drive List Intro and Powering Down List Intro and Opening the Case Jumpers are used to configure certain devices including optical drives.

Below are a few of the most trusted optical drive manufacturers: LG Philips Plextor Lite-On BenQ Samsung 6 Consider an OEM model. How To Install Dvd Drive In Laptop Kategori Instruktioner och stil Licens Standardlicens för YouTube Visa mer Visa mindre Läser in ... Logga in och gör din röst hörd.

Each device on the cable must be placed into the appropriate mode for the cable.

Use the arrow keys to navigate to the Storage tab. Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears. Find Solutions, ask questions, and share advice with other HP product owners. Dvd Drive Power Cable To install the drive, it will be necessary to remove a 5.25" drive slot cover from the case.

Press the Esc key again, press Enter, then press Enter again to Ignore Changes and Exit. Turn your computer on and wait for the system to boot up. However, the software often lets you duplicate music CDs, a task Windows 7 still lacks. Installing a CD/DVD Drive Search the site GO Windows Installing & Upgrading Basics Guides Next, plug the IDE cable into the motherboard, if one isnt already in place. 13.

Confirm the deletion by clicking Yes. The blanks have plastic clips on either side that hold them in place, use a flat-head screwdriver on the edges of the blank to gently ease it out one side at Anti-static wrist-strap (if available). Most new systems will use a panel or door on the side of the system while older systems may require the whole cover be removed.

If you decide to purchase an external drive, you can skip down to Part 3 for details on installing the drivers. 5 Choose a quality drive. Your operating system will inform you when the installation is complete. 2 Install the drivers from the included disc (if necessary). Logga in om du vill rapportera olämpligt innehåll. Be sure to fasten the cover or panel back to the case using the screws that were set aside when the cover was removed.

10 Powering up the Computer Plug the

Replace the cover and plug in the power, keyboard, mouse, and video cables. Like the data cable, the power cable can only be inserted one way, so don't force it. note: Disconnect the power and remove your PC's cover, see our guide. EasyPCbuilder 4 347 800 visningar 30:55 How to fix a DVD drive's tray that doesn't open or eject - Längd: 9:45.

We also have writeable and rewriteable CD-ROM drives, called CD-R and CD-RW respectively. In Device Manager, click Action, select Scan for hardware changes, then wait for Windows to find and install the CD/DVD drive. Finally, insert the mains power cord and turn on the system, the operating system will automatically recognise your new optical drive. Learn more You're viewing YouTube in Swedish.

This indicates that it can read DVDs as well as write to all the types of burnable DVD discs.