enterprisesoftwaresummit.com

Home > Dvd Drive > Installing 2nd DVD Drive

Installing 2nd DVD Drive

Contents

yup everythings plugged in. When you reboot your machine the BIOS should automatically detect the new drive. SUBSCRIBEAs low as $1.00/week Home Local In Local Neighborhoods Houston & Texas Traffic Weather Education Politics & Policy Election 2013 Chronicle Investigates Obituaries Staff Blogs Reader Blogs Columnists Opinions & Editorials Cable Select should be selected only when the devices are to be attached as the cable depicts, ie, the first connector (working away from the motherboard) is the slave and the http://enterprisesoftwaresummit.com/dvd-drive/installing-dvd-drive.html

Lisa ... I guess your using the XP without the service packs.One thing don't use a DL disc if your DVD writer don't support it. Cheap DVD/CD Player/Burner? Logige sisse, et arvamust avaldada. http://www.helpwithpcs.com/upgrading/installing_cd_recorder.htm

How To Connect Dvd Drive To Motherboard

The letter assigned to the drive will depend on your machine's configuration. Look at how it's fastened inside the mounting bay; your hard drive will fasten in the same way. 3Follow the cable of your existing drive to see where it plugs into Geekanoids 78 874 kuvamist 7:44 How To Install DVD Burner (CD-ROM) - Kestus: 6:08. Failure2Compute 88 049 kuvamist 2:15 HOWTO install a CD/DVD drive into a computer - Kestus: 3:11.

If however there is limited space within the case then removing the screws first may be the best option. Phillip Pirikahu 30 561 kuvamist 2:53 How to install CD RW DVD drive in a computer - Kestus: 4:12. I plugged it in but nothing shows up. Also when i try to access the drive with a CD in it says E:\ is not accessible, incorrect function.

Wearing an anti-static wristband is preferable whenever working with sensitive electrical equipment. EasyPcRepairs 53 707 kuvamist 8:06 How to Install an Optical Drive(DVD/CD Player) - Kestus: 2:15. You will now need to check the jumper settings, which will depend on whether this will be the primary or slave drive on the IDE channel. http://www.tomshardware.com/forum/263508-32-install-drive bringtherainOct 31, 2010, 11:47 AM Im running XP 32bit.

This power connection is the longer of the two L-shaped connectors on the back of the drive. 8. You can also push the blank out from the inside of the case with your fingers, but be careful not to loosen anything within the case while you do it. If you are replacing your drive, it is likely that this is the master drive, though if you are adding a second drive, it is more likely the new drive will Logige sisse, et arvamust avaldada.

Dvd Writer

Sulge Jah, jäta see alles Võta tagasi Sulge See video pole saadaval. read this article This guide will take you through the process of installing a CD recorder or DVD player/recorder into your PC, step by step with the aid of photos. How To Connect Dvd Drive To Motherboard You may wish to test the device is correctly installed before replacing the covers but it is advisable to replace the covers before reconnecting the mains. External Dvd Drive Slide the DVD drive into the front of the slot, such that the side with all the connections goes in first.

For Seniors: Contact Microsoft Customer Support Finding Large Files on Your PC Load more ComputersPCsHow to Install an Internal CD/DVD Drive in Your Computer How to Install an Internal CD/DVD Drive check over here The position of the jumper relative to the pins determines whether the drive is master or slave, and a sticker on the drive itself should inform you of which pins to I ended up giving up. (that was an older board) I have a new board now that only has 2 SATA ports. Haven't tried burning with the verbatim as I dont wanna risk using up a DL disc.

Thinkstock Images/Comstock/Getty Images Related Articles [DVD Drive] | How to Open a DVD Drive on a HP Laptop [Hard Drive] | How to Add a Second Hard Drive in Windows 8 Once the cables are in place ensure you have not loosened anything during the installation and proceed to put the covers back onto the case. Funktsioon ei ole praegu saadaval. http://enterprisesoftwaresummit.com/dvd-drive/installing-a-dvd-r-rw-drive.html I was going to ask if you remembered to plug in the power cable, but if the bios saw it you did.

I was suggesting switching the ports for the new LG drive and my HDD. If you have hidden drive bays, you will need to slide the drive in enough to allow you to fit the front plates. Some drives will also require you to plug the other end of the USB cable into the drive itself, although other drives have this cable hard-wired.

Anti-static wrist-strap (if available).

Things Needed Flat-head screwdriver Philips-head screwdriver SATA cable Anti-static wrist-band References (1) PC World: How to Install a DVD Drive Photo Credits Thinkstock Images/Comstock/Getty Images Suggest an Article Correction Related Searches If you are not replacing a drive then you will need to remove the blank from the computer case at the front of the drive bay where you want the drive. However, if you are replacing a drive, you will not need to prepare a new drive bay. This will enable a sufficient amount of air to flow between the two drives.

Keeping one hand on a metal part of the case will have the same effect, though you may need both hands when installing certain items of hardware. Robert Ubieta 16 468 kuvamist 4:34 How to repair a CD/DVD drive that won't eject the discs - HD - Kestus: 19:04. If no, get one this. weblink solved How do I remove the panel on cit vantage gamers case to install DVD drive?

Your newly installed second drive now has a letter, and the drive appears in your Computer program when you click Start and choose Computer.