enterprisesoftwaresummit.com

Home > Dvd Drive > Installing A New DVD Burner

Installing A New DVD Burner

Contents

Answer this question Flag as... Even if the Blu-Ray drive does not write (BD-ROM), there's a good chance it will write DVDs. 3 Compare read and write speeds. For the easiest installation, move your computer to a location that allows you to easily access the case, such as on a table. Find a power connector coming from your computer's power supply. navigate here

Make sure to secure the drive on both sides of the case. Follow the manufacturer's instructions to install your CD Writer software if applicable. Some cases use rails to secure the drive to the case. The IDE cable or cables inside your PC are distinguished by their flat, wide appearance and have either two or three connectors.

How To Install Dvd Drive On Pc

SATA power and SATA data. Hinzufügen Playlists werden geladen... Nearly all drives are inserted in from the front of the computer, though you may need to double-check your computer's documentation.

Next take the screws that came with your CD/DVD Writer and secure the device so it is flush with the front of your case (fig 1.5). Wird geladen... The next step is to insert the drive into its new home. How To Install Cd Drive In Laptop Be sure to consult the instruction manual that came with the drive for any specific instructions for your operating system.

Continue Reading Up Next Up Next List DIY: Installing a Desktop

Anti-static wrist-strap (if available). How To Connect Dvd Drive To Motherboard When looking at different models, it will be useful to compare the read and write speeds. Once the drive is in position insert one of the fixing screws halfway in but do not tighten it yet.

IDE cable (if required).

If you are securing with screws, you should be suing two screws on each side. How To Install Dvd Drive In Laptop Ask us. Most new DVD drives will read at 16X, and write at up to 24X. A cable with a third, middle connector can host two drives.

How To Connect Dvd Drive To Motherboard

Show more unanswered questions Ask a Question 200 characters left Submit Already answered Not a question Bad question Other If this question (or a similar one) is answered twice in this Your operating system will inform you when the installation is complete. 2 Install the drivers from the included disc (if necessary). How To Install Dvd Drive On Pc Steps Method 1 Choosing the Right Drive 1 Learn the different formats. How To Connect Dvd Drive To Motherboard Sata Flag as...

Please try again. check over here When this is done, fasten the drive to the computer case by placing screws into the appropriate slots or holes in the case.

6 Attaching the Internal Audio Cable Attach the SATA power connectors are almost always black; Molex connectors are almost always white. If you don't have a wristband, touch a metal faucet to discharge static buildup. 4 Remove the old drive (if necessary). Install Dvd Drive Windows 7

Thanks for letting us know. If you are using the Windows operating system go to My Computer and you should see your new drive there. Wird geladen... http://enterprisesoftwaresummit.com/dvd-drive/installing-a-dvd-burner.html Note there are 3 connections and also notice the difference in distance between the connectors.

Wird geladen... Cd Drive Installation Software If your drive did not install itself, you may need to install the drivers that came with it or that you downloaded from the manufacturer. Current Discussions Excel File Recovery Export Outlook OST file into PST format How to recover deleted call history form iPhone ?

Use the included SATA data cable, or use your own if the drive did not come packaged with any.

The method for opening the case will vary depending upone the case. The letter assigned to the drive will depend on your machine's configuration. Hinzufügen Möchtest du dieses Video später noch einmal ansehen? Dvd Drive Power Cable SATA cables can only be inserted one way but ensure the cable is fully inserted.

Wird geladen... Answer this question Flag as... These all refer to the different read and write capabilities of the drive. weblink Drivers for the drive are typically installed automatically.

Wird geladen... This will help ensure that your drive lasts a long time, and that you get a solid warranty. Wird geladen... Proceed to place the other screws (4 in total) and then fully tighten the screws.

Cable Select should be selected only when the devices are to be attached as the cable depicts, ie, the first connector (working away from the motherboard) is the slave and the Connect it to the next empty SATA port on your motherboard. List How To Install a CPU and Heatsink Article This Terminal Trick Will Eject a Mac's Stuck CD/DVD Article How to Preserve Your Vinyl Records by Backing Them Up to CD wikiHow Contributor You can try to manually find the drivers online for your specific model of DVD drive.

Generally, all new drives these days will be DVD+/-RW or just DVD RW. How We Test Laptops Still lost? To install the drive, it will be necessary to remove a 5.25" drive slot cover from the case. Wird geladen...

These instructions are valid for any form of optical based drive such as CD-ROM, CD-RW, DVD-Rom or DVD burners. Slave should be selected if this will be the second device on a singe IDE cable, for instance, if you do not already have a CD-ROM drive then you could attach If so, you'll connect your DVD burner to the secondary IDE interface on your motherboard. OST Recovery Suggest me Laptop under $800 See more forum posts Research by Category Desktops Laptops Tablets & E-Readers Printers PC Components Research By Brand Samsung Apple Dell Hewlett-Packard Lenovo Connect

Push the drive slightly from behind, and then pull the drive out from the front of the case. 5 Locate an empty 5.25" drive bay. Flag as... Remove an old IDE drive After removing the covers the next step is to locate and remove the data and power cables attached to the old device. Show more unanswered questions Ask a Question 200 characters left Submit Already answered Not a question Bad question Other If this question (or a similar one) is answered twice in this

HARDWARE SOFTWARE INTERNET PC UPGRADING PC MAINTENANCE DICTIONARY GAMING How to install a CD/DVD writer | SATA and IDE drives Whether you are installing a new optical drive into your computer's Hochgeladen am 23.08.2007For about ten minutes work and less than $65 you can upgrade your optical drive to a dual layer DVD burner. If your PC is using a 40-conductor cable, you'll need to swap it out.