Installed 2nd Hard Drive In XP System
Step 4: Configure the BIOS Next, boot into your PC's BIOS-setup utility to verify that it recognizes the new drive and positions it correctly in the drive hierarchy. (Check your PC's However, I am still stumped. Using cable select worked out great. It worked, thank you! navigate here
This was more than enough to help even the Lowest level of expearance Swap or add a hard drive!!!I want to say Thank YOU!!! Some SATA drives also support familiar legacy Molex four-pin power connectors—you can use a Molex or SATA connector. Two hardrives are Western Digital and one is a Maxtor.They all are marked master slave etc. Finally, some programs will work without reinstallation!
Install New Hard Drive Windows 10
In Windows terms, you might think of a partition as a single drive letter (like C: or D:). It was so easy and now my son-in-law's computer works great. I know just enough to be dangerous to myself and all computers around me.
Reply Michelle on March 6, 2009 at 7:59 pm Help! Wenn du bei YouTube angemeldet bist, kannst du dieses Video zu einer Playlist hinzufügen. To others out there who are stumped by techy terminology, I suggest browsing a little bit more sites & things will fall into place. How To Install A New Hard Drive Windows 7 Preview post Submit post Cancel post You are reporting the following post: Need help installing XP on SECOND SATA hard drive This post has been flagged and will be reviewed by
Can I replace it with a Seagate Momentus 7200.2 ST9200420AS 200GB 7200 RPM, which is SATA?thanks, Spiv Reply israel on March 3, 2008 at 12:59 am ------HELP PLEASE----- i am putting How To Install A Second Hard Drive Right-click the bar, and choose New Partition to launch the New Partition wizard. How do i remove this data? http://www.simplyguides.net/guides/prepare_second_hdd/prepare_second_hdd1.shtml He spends an absurd amount of time in the VR room and tinkering with DIY home automation systems.
I would like to add a 2nd SATA hard drive and was wondering if it can be connected in serial with the existing hard drive. How To Install A New Hard Drive On A Laptop How do i clone the 40gig drive onto the 250gig without formatting the 250gig. i changed the primary drive in the bios to the ide hard drive , still couldnt get passed start up mode. They were both installed with cable select with an 80 conductor ribbon cable.
How To Install A Second Hard Drive
Your page sent me through the steps I needed and "I'm OK now" Thanks guys, I'll be back! http://blog.kevindonahue.com/archives/2004/04/03/how_to_install_additional_hard_drives_in_xp/ Reply vince on March 26, 2013 at 2:21 pm for one if the NEWB reads this it will perk his interest. Install New Hard Drive Windows 10 Then I tried the same method with MS Publisher - nothing. How To Add A New Hard Drive I have removed the hardware address jumper on the WD drive, as suggested, and connected the drive to the primary connector on the IDE cable.
Athul Jayaram April 15, 2013 at 2:41 pm is the Old C drive shown on your windows 7? check over here What do people recommend to safely install my hard drive? In the process of removing my backup files and converting to use the back up as the main drive, I got the message "hard drive failure is eminent". Step 1: Back up and scout around First, back up your critical files (don't forget your Outlook .PST archive) to optical discs, an external drive, or online storage. How To Format A New Hard Drive
ok the c drive does not have that much memary i took the c drive out and tryed to put a new one in but the hook ups on the drive Another possibility is to put the old drive in the new system as primary and do a repair install from the CD. Wird verarbeitet... http://enterprisesoftwaresummit.com/hard-drive/installed-a-new-hard-drive.html You can also uninstall any software that you will not need to access through the VM.
the one you just bought at best buy.. How To Install A Second Hard Drive Windows 7 sometimes learning new stuff is also learning how to say it. Message box is not allowed as there is I/O problem.
It sounds like i'm at least on the right path……Here is the exact log…Phoenix ROM BIOS PLUS Version 1.10 A05 Copyright 19854-1988 Phoenix Techmologies LTD.
Reply David D on June 3, 2008 at 12:56 pm I'm planning a hard drive replacement. Get the answer Best answer PaperdocAug 27, 2009, 11:46 PM Sturm is right. Please help. What To Do After Installing A New Hard Drive Reply Janine on August 16, 2007 at 6:28 pm Many thanks for the VERY SIMPLE step by step instructions for initializing a STA harddrive.
Schließen Weitere Informationen View this message in English Du siehst YouTube auf Deutsch. Thank you! Open Disk Management in Windows XP.From the Desktop or Start Menu, right click on My Computer and select Manage. weblink Reply travis gibbs on December 22, 2009 at 3:23 am ok i have a old computer may me 4 years or more.
Then close the case. Save changes and exit the utility. I toruble shoot circuits for a living and use computers every day for work. FREE SOFTWARE called XXCLONE.
August 4, 2015 at 1:15 pm You are a legend, I didn't realize this sort of thing was so easy! Reply rhondee on February 17, 2009 at 2:36 am If my current hard drive is corrupted with a virus and I transfer the content to a new hard drive, will it The tip on setting the jumper properly is what got my drive up and running. An Extended Partition: must be created so that you can create Logical drives.
Not that folk today seem to seem to emit that "entitled" feeling at times.But good news about the cloning. I need the old drive in order to run the image software, as I don't have a boot CD or the windows disks on hand. EXCELLENT!!!!thanks guys for creating this it sure is a help for newbies out there 🙂 as Kyle said waaaaaay back, "I did'nt know that disk management exist" hehehe Reply Bill R If you don't know the difference between ide & sata then you need to read up on that before trying to fit a new disk drive or you'll end up buyiing
It had been about 20 years since I have messed with the innards of of a computer. I am trying to do this with the original Hard Drive removed and the CD-Rom drive selected as the on from which to boot up. The drive is a SCSI. Reply Elliot on August 11, 2007 at 9:03 am Thanks!
Now, the C drive only has 550 mb on it & the "I" drive has 159 GB on it. Just long enough to forget the last time the World went batshit crazy. Hinzufügen Möchtest du dieses Video später noch einmal ansehen? You will now have to create a New Partition and to do this right click on Disk 1 and choose New Partition.
My HDD has a Windows XP Pro Installed in it prior the crashed of motherboard.