Installing A New Hard Drive & ATA/100 PCI Card
Very helpful!! Partition Magic (now sold & "maintained" by Symantec) used to come with a little utility called "Magic Mover" that could successfully move many "clean" apps to other drives letters w/o a So this is where the total number of PATA devices in your system is important. on this one disk, and you cannot recover any of it! http://enterprisesoftwaresummit.com/hard-drive/installing-a-new-hard-drive-easy-or-hard.html
Well, does the PCI card have a second IDE port on it unused? So, you were right all along. Setting Jumpers: SATA DrivesGood news! Reply Rivers on August 4, 2007 at 2:07 am I installed a extra hard drive in my pc and would like to completely wipe all data from it. http://www.everymac.com/systems/apple/powermac_g4/faq/power-mac-g4-how-to-replace-upgrade-hard-drive-big-drive-support.html
Maxtor Hard Drive Jumper Settings
Reply Ron. It allows you to partition and format (either FAT or NTFS), and I'm pretty sure it would work on your Promise controller card (I used it with my HighPoint RAID controller I have a question regarding internal hard drives. I think WD has made a big mistake in suggesting that, as their instructions state: "Quick Install" I have 3 other WD HD's no problem with any of them.
This will prevent frustrations about losing programs after you have already formatted your computer.If you are simply installing a secondary hard drive for storage, you don't have to make any changes Your current boot device, the new 500 GB drive, has Win XP installed on its Primary Partition limited by this size restriction and you cannot change that size directly. Partitioning software is great for people that are willing to invest lots of time in understanding how to use it correctly. Maxtor Diamondmax Plus 9 Jumper Settings But there are ways around that.If your system is operating stably with this structure, I suggest the first priority is recovery of the original C: drive that now has Partition Table
the c drive that im using now as like no memary some one told me to stick them in my d/cd or my e/dvd/cd drive to keep them out of my If you go now to the Standard CMOS Features on Manual page 3-6 and look in your BIOS screens, I expect you can see the old 250 GB Seagate as Primary I'm going to break off this post here and look for help for that. Check This Out If you have a really slow CF card, it will be the bottleneck.
Reply Mark barbee on August 31, 2009 at 7:25 pm Here's one for ya. Maxtor N256 Jumper Settings An example can be found at http://www.xpcgear.com/ide2sata.html Also, keep in mind that these "dangle boards" only support ONE EIDE device per SATA port.3.) The final option would be to purchase an I haven?t used one for several years, so I?d imagine that could have changed drastically by now. Thhe only way it will let me allocate a letter is if i select it as removable drive- then it appears in ‘My Computer' and asks if i want to format
Maxtor Diamondmax Plus 9 80gb Ata/133 Hdd
other then that its not able to without this the drive will not read and be able to transfer files Reply Gary Hart on August 7, 2007 at 4:46 am Thanks http://www.computershopper.com/storage/howto/install-a-new-hard-drive-in-five-easy-steps It may have its own BIOS to check. Maxtor Hard Drive Jumper Settings USB 2.0 is okay, but FireWire 400 is faster, and FireWire 800 faster yet - sometimes faster than USB 3.0! Maxtor N256 Hard Drive Specs This is because it lacks "48-bit LBA Support" which was added to XP in SP1.
All Rights Reserved Tom's Hardware Guide ™ Ad choices CNET Reviews Best Products Appliances Audio Cameras Cars Networking Desktops Drones Headphones Laptops Phones Printers Software Smart Home Tablets TVs Virtual Reality http://enterprisesoftwaresummit.com/hard-drive/installing-third-hard-drive.html These cards have an IDE controller chip on them, some are known to work well, some are not. This requires an open PCI card slot on your motherboard. A possible alternative reason: you have run out of room on the C:\ partition, and have a CD with the OS for use in case of an emergency to restore the Maxtor Sata Hard Drive Jumper Settings
If you forget to turn on the External drive, you might get errors and things may not work correctly until you reboot.Hope the information is helpful.Submitted by: Juan S. If it can't reach the empty bay, see if any bundled adapters help. Then you'll need an adapter, such as a Molex-to-SATA adapter (some kits bundle one), or a Y-adapter that splits a lead in two. http://enterprisesoftwaresummit.com/hard-drive/installing-new-2nd-hard-drive-plus-drive-letters-questions.html Let's get started:Turn the computer off, unplug it, and take the case off.
I ask because there are two other versions with names ending in Neo2-S and Neo2-FIS2R. Maxtor 80gb External Hard Drive You can convert your parallel drive to an external type by purchasing a enclosure case. Another option is using a controller card that has bios that interprets the size correctly to the original system board.
For newer drives to be compatible, Seagate used a jumper system (NOT the same as the Master / Slave jumpers for IDE drives) to force the drive to slow down to
Having the harddrives connected to a PCI card is a mistake when you can connect them to the motherboard where they belong. I'm not very familiar with that process. For Serial ATA drives (SATA), you don't need to worry about jumpers at all. Maxtor Diamondmax Plus 9 160gb Look around the hard drive, and you will find (somewhere) a schematic telling you how to set these jumpers in order for the hard drive to be recognized as either the
I still need to reinstall Windows XP with the SATA drivers onto the 250GB Seagate (ex-messed up).Do I need to change the settings in the Bios if the IDE is going Reply Jon Amoncio on February 12, 2008 at 3:12 am My motherboard was crashed and need to be replaced. Sorry for the dumb question but is there really such a thing anyway?? weblink Note: you may have to change the jumper settings on your old drive.
The instructions sent with the drive are a joke. But don't be surprised if your formatted drive has less capacity than the package claims. Every IDE port in use MUST have a designated Master device. As for getting into the BIOS; that differs from Manufacturer to Manufacturer.Submitted by: Mark H.
Using cable select worked out great. On the con side, it's not nearly as fast as having the drive plugged into a SATA or EIDE port.Submitted by: Pete Z.***********************************************************************Answer:Hi Trevor there are two options for you.Option 1 See if you can find a safe and reliable way to fix that Primary Master unit in this computer configuration. That's another option.Hope this helps.
Good luck.Submitted by: Bill H. The existing 250 GB unit is connected to the PCI card by a ribbon cable from an IDE port on the card, and the END connector of that cable should be Risley - it's not easy finding good tech support at 10:30, but I've been waiting too long to get this up new drive up and running to wait, and this little Too many extras can be taxing on a power supply leading to failure or even intermittent problems.
Delete all Partitions on the Samsung disk unit.Step 2: RIGHT-click on the Samsung drive and choose to Create Partition. How do you replace or upgrade the hard drive in the Power Mac G4 models? could any one help. Reply nick on October 19, 2009 at 11:30 pm Hey my pc wont reconize my hard drive,even a exernal hard drive.
Thanks for the instructions! While it?s not as clean as having the drive embedded in the PC, having it available as an external drive literally opens up a ton of possibilities. WD400 40GB HD w/W98se OS as master. You also have to be careful because Win2000 NTFS has certain restrictions.
Those are high end gaming boards that have had the EIDE ports removed from the design to speed up the function of the motherboard by a few nanoseconds. This is VERY time-consuming usually.